How much floor space does drive-in rack actually save?

Trading aisles for lanes typically shrinks the footprint for the same pallet count by roughly a third, sometimes more in a taller building. We give you the side-by-side numbers in the layout rather than a rule of thumb.

What's the difference between drive-in and drive-through rack?

Drive-in is open at one end and runs LIFO - deep storage. Drive-through is open at both ends and allows FIFO, at the cost of some positions and a second access aisle.

Does drive-in slow down put-away?

It can, since the truck has to travel into the lane for every pallet. It works best for bulk moves rather than piece picking - pairing it with a selective pick face keeps daily order fulfillment from bogging down.

Kearny, New Jersey

Drive-In Rack in Kearny, NJ

Name: Newark Pallet Rack — Kearny
Address: 146-B Ferry St., Newark, NJ, 07105, US
Telephone: (973) 318-1590
Price range: $$

Deep bulk storage can relieve South Kearny floor pressure after a container surge, but slab information and handling clearance must be settled before rail lanes are committed.

Drive-In Rack planning starts with that Kearny constraint, not a drawing borrowed from another building. Include floor and anchor review in the plan and preserve staging for drayage arrivals near the Newark Bay crossings. We compare capacity, access, and the way your inventory moves before recommending a configuration. Send your building dimensions and load details for a free warehouse consultation. You receive a layout and itemized pricing before deciding what to order or move.

(973) 318-1590

Why Kearny Warehouses Work With Us

Include floor and anchor review in the plan and preserve staging for drayage arrivals near the Newark Bay crossings. Around the South Kearny Meadowlands and the Newark Bay bridges, the practical question is how storage will work alongside receiving, dispatch, and the space reserved for people and production. Kearny operations dealing with third-party logistics need a plan that reflects their actual product mix rather than a generic rack count. We ask about the peak week as well as normal inventory so the drawing does not depend on an unusually quiet day.

For drive-in rack, the useful comparison is what changes at the working face: aisles traded for lanes to push positions per square foot. A building in South Kearny may have a different column grid, usable height, or loading approach from the next address. Those measurements belong in the scope before materials are priced.

Newark Pallet Rack is a division of Warehouse Equipment & Supplies Co.. You have a single contact for layout revisions, the itemized scope, delivery planning, and installation coordination with installation partners. We explain the tradeoffs, identify information still needed, and keep the Kearny drawing available for later expansion or replacement components. The aim is a storage plan your team can use, with clear responsibilities rather than assumptions.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include the South Kearny Meadowlands and the Newark Bay bridges, South Kearny, the Meadowlands district, Central Avenue industrial, Passaic Avenue.

Third-party logistics

Freight and drayage

Food distribution

Bulk storage

How Drive-In Rack Works

Deep pallet lanes replace internal aisles for bulk storage of a small number of SKUs.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and deep storage. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, because a lane that takes daily contact from forklifts is a lane that will eventually need repair.

What Your Drive-In Rack Project Includes

The design starts with the forklift, not the rack. Mast height, overall width, load backrest, and turning clearance decide lane dimensions, so truck specifications get collected before anything is drawn.

Next we look at SKU depth. Drive-in rewards deep lanes of a single product and punishes variety - if a lane never fills, you've built an expensive way to store less than you could have with selective. Where the inventory profile is mixed, we'll usually recommend a hybrid: selective at the pick face, drive-in behind it for reserve.

The quote itemizes frames, rails, rail supports, guide rails, and column protection, with a CAD drawing showing lane depth, rail elevations, and total positions. Installation partners anchor, plumb, and align every rail run, then verify a loaded pallet travels the full lane before handing the system over.

Because drive-in lanes take contact from lift trucks over time, we help identify replacement rails and guards and confirm availability before scheduling repairs.

Include floor and anchor review in the plan and preserve staging for drayage arrivals near the Newark Bay crossings. For the Kearny site near the South Kearny Meadowlands and the Newark Bay bridges, we confirm receiving access and where components can be staged before agreeing on delivery windows. The finished drawing identifies the storage zones, access requirements, and capacities for the proposed arrangement. Product-specific components and testing are included in the scope rather than assumed to be interchangeable with ordinary pallet rack. You receive a written quote and a schedule based on the approved scope and confirmed availability, not an unqualified completion promise.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (973) 318-1590

Recent Installations

Racking projects completed for warehouses across Greater Newark and North Jersey.

View More Projects

Get a Drive-In Rack Quote for Your Kearny Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (973) 318-1590.

Newark Pallet Rack

146-B Ferry St.

Unit #1214

Newark, NJ 07105

(973) 318-1590

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Newark Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.