How deep should a pallet flow lane be?

Five to twenty pallets is typical. Depth should match how much of one SKU moves through in a cycle - a lane that never fills is wasting a pick face. We size depth from your actual movement data, not a rule of thumb.

What keeps pallets from moving too fast down the lane?

Lane pitch is calculated for the load, and brake rollers or separators control travel from there. Pallets index forward at a walking pace, protecting both product and frames.

Does pallet condition matter?

A great deal. Broken bottom boards and heavy overhang cause most hang-ups in flow lanes. If your pallet pool is rough, full-width rollers are the safer specification, and we'll tell you that up front rather than after installation.

Pallet Flow Rack warehouse storage system

Cranford, New Jersey

Pallet Flow Rack in Cranford, NJ

Medical-supply or food stock in a Cranford flex building needs older receipts kept accessible, while attached offices and limited clear height restrict where two working aisles can go.

Pallet Flow Rack planning starts with that Cranford constraint, not a drawing borrowed from another building. Confirm lane pitch and aisle clearance before treating a compact warehouse area as a candidate for FIFO storage. We compare capacity, access, and the way your inventory moves before recommending a configuration. Send your building dimensions and load details for a free warehouse consultation. You receive a layout and itemized pricing before deciding what to order or move.

(973) 928-7208

Why Cranford Warehouses Work With Us

Confirm lane pitch and aisle clearance before treating a compact warehouse area as a candidate for FIFO storage. Around the Garden State Parkway Exit 136 business corridor, the practical question is how storage will work alongside receiving, dispatch, and the space reserved for people and production. Cranford operations dealing with wholesale distribution need a plan that reflects their actual product mix rather than a generic rack count. We ask about the peak week as well as normal inventory so the drawing does not depend on an unusually quiet day.

For pallet flow rack, the useful comparison is what changes at the working face: gravity lanes loaded on one side and picked on the other. A building in the Commerce Drive corridor may have a different column grid, usable height, or loading approach from the next address. Those measurements belong in the scope before materials are priced.

Newark Pallet Rack is a division of Warehouse Equipment & Supplies Co.. You have a single contact for layout revisions, the itemized scope, delivery planning, and installation coordination with installation partners. We explain the tradeoffs, identify information still needed, and keep the Cranford drawing available for later expansion or replacement components. The aim is a storage plan your team can use, with clear responsibilities rather than assumptions.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Operations We Rack Around Here

Nearby areas we work in regularly include the Garden State Parkway Exit 136 business corridor, the Commerce Drive corridor, North Avenue industrial, Walnut Avenue, Lincoln Park East.

Wholesale distribution

Printing and packaging

Medical supplies

Light assembly

How Pallet Flow Rack Works

Load one side, pick the other, and let gravity enforce first in, first out.

Load end

Pallets enter at the high end of the lane. Each new pallet stages behind the one before it, so put-away is a single move made from the load-side aisle.

Gravity conveyor

Full-width rollers or skate-wheel tracks, set on a pitch calculated for the pallet weight, carry loads forward under control rather than free rolling.

Braking and separation

Brake rollers and pallet separators regulate travel and stop pallets from bunching, protecting both the product and the structure underneath it.

Pick end

Pickers work a face of first-in pallets. Pull one and the next indexes forward automatically, so the pick aisle stays organized without anyone re-facing stock.

What Your Pallet Flow Rack Project Includes

Flow racking is engineered per lane, not pulled off a shelf. Pallet weight, deck condition, bottom-board orientation, and desired lane depth all drive the roller or wheel selection and the pitch calculation, so the first step is pinning down exactly what's moving through the lane.

From there we set lane count and depth against your throughput. Fewer, deeper lanes maximize storage; more, shallower lanes give the pick face more SKU variety. Both versions get modeled with position counts so the tradeoff is visible before you buy, not found after.

The itemized quote covers frames, beams, rail and roller assemblies, brakes, entry and exit guides, and guarding. At installation the crew sets pitch, tests loaded travel in every lane, and tunes brakes before the system goes live.

Afterward you have documented capacities, a lane map your team can hand to new hires, and a local contact for brake rollers and wheels as the system racks up cycles.

Confirm lane pitch and aisle clearance before treating a compact warehouse area as a candidate for FIFO storage. For the Cranford site near the Garden State Parkway Exit 136 business corridor, we confirm receiving access and where components can be staged before agreeing on delivery windows. The finished drawing identifies the storage zones, access requirements, and capacities for the proposed arrangement. Product-specific components and testing are included in the scope rather than assumed to be interchangeable with ordinary pallet rack. You receive a written quote and a schedule based on the approved scope and confirmed availability, not an unqualified completion promise.

Date-coded food, beverage, and pharmaceutical inventory

High-volume SKUs with steady, predictable turns

Cold storage where every cubic foot carries a cost

Staging finished goods coming off a production line

Operations that need FIFO documented, not just assumed

Call (973) 928-7208

Recent Installations

Racking projects completed for warehouses across Greater Newark and North Jersey.

View More Projects

Get a Pallet Flow Rack Quote for Your Cranford Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (973) 928-7208.

Newark Pallet Rack

146-B Ferry St.

Unit #1214

Newark, NJ 07105

(973) 928-7208

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Newark Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.