How is cantilever rack different from pallet rack?

Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

How far apart should the columns be?

Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing.

Straight arms or inclined arms?

Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

Cantilever Rack warehouse storage system

Carteret, New Jersey

Cantilever Rack in Carteret, NJ

Name: Newark Pallet Rack — Carteret
Address: 146-B Ferry St., Newark, NJ, 07105, US
Telephone: (973) 318-1590
Price range: $$

Oversized packaged products or long maintenance materials in a Carteret distribution center may be left on the floor when the opening layout includes only conventional pallet bays.

Cantilever Rack planning starts with that Carteret constraint, not a drawing borrowed from another building. Identify those loads early and reserve open-front arms near their working route without blocking receiving or packing. We compare capacity, access, and the way your inventory moves before recommending a configuration. Send your building dimensions and load details for a free warehouse consultation. You receive a layout and itemized pricing before deciding what to order or move.

(973) 318-1590

Why Carteret Warehouses Work With Us

Identify those loads early and reserve open-front arms near their working route without blocking receiving or packing. Around the Carteret waterfront distribution parks off Turnpike Exit 12, the practical question is how storage will work alongside receiving, dispatch, and the space reserved for people and production. Carteret operations dealing with e-commerce fulfillment need a plan that reflects their actual product mix rather than a generic rack count. We ask about the peak week as well as normal inventory so the drawing does not depend on an unusually quiet day.

For cantilever rack, the useful comparison is what changes at the working face: arm length and capacity set by the bundles you handle. A building in the Carteret waterfront may have a different column grid, usable height, or loading approach from the next address. Those measurements belong in the scope before materials are priced.

Newark Pallet Rack is a division of Warehouse Equipment & Supplies Co.. You have a single contact for layout revisions, the itemized scope, delivery planning, and installation coordination with installation partners. We explain the tradeoffs, identify information still needed, and keep the Carteret drawing available for later expansion or replacement components. The aim is a storage plan your team can use, with clear responsibilities rather than assumptions.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the Carteret waterfront distribution parks off Turnpike Exit 12, the Carteret waterfront, Middlesex Avenue industrial, Roosevelt Avenue, Port Carteret.

E-commerce fulfillment

Third-party logistics

Consumer goods

Import distribution

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the slab. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What Your Cantilever Rack Project Includes

Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs.

From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out.

The quote itemizes columns, bases, arms, bracing, and anchors, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Installation partners anchor bases, plumb columns, brace the run, and set arm elevations to the drawing.

The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy.

Identify those loads early and reserve open-front arms near their working route without blocking receiving or packing. For the Carteret site near the Carteret waterfront distribution parks off Turnpike Exit 12, we confirm receiving access and where components can be staged before agreeing on delivery windows. The finished drawing identifies the storage zones, access requirements, and capacities for the proposed arrangement. Product-specific components and testing are included in the scope rather than assumed to be interchangeable with ordinary pallet rack. You receive a written quote and a schedule based on the approved scope and confirmed availability, not an unqualified completion promise.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (973) 318-1590

Recent Installations

Racking projects completed for warehouses across Greater Newark and North Jersey.

View More Projects

Get a Cantilever Rack Quote for Your Carteret Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (973) 318-1590.

Newark Pallet Rack

146-B Ferry St.

Unit #1214

Newark, NJ 07105

(973) 318-1590

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Newark Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.