How much floor space does drive-in rack actually save?

Trading aisles for lanes typically shrinks the footprint for the same pallet count by roughly a third, sometimes more in a taller building. We give you the side-by-side numbers in the layout rather than a rule of thumb.

What's the difference between drive-in and drive-through rack?

Drive-in is open at one end and runs LIFO - deep storage. Drive-through is open at both ends and allows FIFO, at the cost of some positions and a second access aisle.

Does drive-in slow down put-away?

It can, since the truck has to travel into the lane for every pallet. It works best for bulk moves rather than piece picking - pairing it with a selective pick face keeps daily order fulfillment from bogging down.

Linden, New Jersey

Drive-In Rack in Linden, NJ

Name: Newark Pallet Rack — Linden
Address: 146-B Ferry St., Newark, NJ, 07105, US
Telephone: (973) 318-1590
Price range: $$

Bulk reserves in a Linden industrial building may suit deep storage, but heavy loads and mixed pallet footprints can make a generic rail arrangement inappropriate.

Drive-In Rack planning starts with that Linden constraint, not a drawing borrowed from another building. Check each load's bearing points and lane access for the Tremley Point operation before assigning repeat SKUs to deep positions. We compare capacity, access, and the way your inventory moves before recommending a configuration. Send your building dimensions and load details for a free warehouse consultation. You receive a layout and itemized pricing before deciding what to order or move.

(973) 318-1590

Why Linden Warehouses Work With Us

Check each load's bearing points and lane access for the Tremley Point operation before assigning repeat SKUs to deep positions. Around the Tremley Point industrial area along the Arthur Kill, the practical question is how storage will work alongside receiving, dispatch, and the space reserved for people and production. Linden operations dealing with chemicals and coatings need a plan that reflects their actual product mix rather than a generic rack count. We ask about the peak week as well as normal inventory so the drawing does not depend on an unusually quiet day.

For drive-in rack, the useful comparison is what changes at the working face: aisles traded for lanes to push positions per square foot. A building in Tremley Point may have a different column grid, usable height, or loading approach from the next address. Those measurements belong in the scope before materials are priced.

Newark Pallet Rack is a division of Warehouse Equipment & Supplies Co.. You have a single contact for layout revisions, the itemized scope, delivery planning, and installation coordination with installation partners. We explain the tradeoffs, identify information still needed, and keep the Linden drawing available for later expansion or replacement components. The aim is a storage plan your team can use, with clear responsibilities rather than assumptions.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include the Tremley Point industrial area along the Arthur Kill, Tremley Point, the Linden Industrial Park, Wood Avenue corridor, South Wood.

Chemicals and coatings

Automotive aftermarket

Metal fabrication

Distribution

How Drive-In Rack Works

Deep pallet lanes replace internal aisles for bulk storage of a small number of SKUs.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and deep storage. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, because a lane that takes daily contact from forklifts is a lane that will eventually need repair.

What Your Drive-In Rack Project Includes

The design starts with the forklift, not the rack. Mast height, overall width, load backrest, and turning clearance decide lane dimensions, so truck specifications get collected before anything is drawn.

Next we look at SKU depth. Drive-in rewards deep lanes of a single product and punishes variety - if a lane never fills, you've built an expensive way to store less than you could have with selective. Where the inventory profile is mixed, we'll usually recommend a hybrid: selective at the pick face, drive-in behind it for reserve.

The quote itemizes frames, rails, rail supports, guide rails, and column protection, with a CAD drawing showing lane depth, rail elevations, and total positions. Installation partners anchor, plumb, and align every rail run, then verify a loaded pallet travels the full lane before handing the system over.

Because drive-in lanes take contact from lift trucks over time, we help identify replacement rails and guards and confirm availability before scheduling repairs.

Check each load's bearing points and lane access for the Tremley Point operation before assigning repeat SKUs to deep positions. For the Linden site near the Tremley Point industrial area along the Arthur Kill, we confirm receiving access and where components can be staged before agreeing on delivery windows. The finished drawing identifies the storage zones, access requirements, and capacities for the proposed arrangement. Product-specific components and testing are included in the scope rather than assumed to be interchangeable with ordinary pallet rack. You receive a written quote and a schedule based on the approved scope and confirmed availability, not an unqualified completion promise.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (973) 318-1590

Recent Installations

Racking projects completed for warehouses across Greater Newark and North Jersey.

View More Projects

Get a Drive-In Rack Quote for Your Linden Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (973) 318-1590.

Newark Pallet Rack

146-B Ferry St.

Unit #1214

Newark, NJ 07105

(973) 318-1590

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Newark Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.